Bracket for LCD screen on Prusa Mendel i3
by strawdog, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
Recently built a Prusa Mendel i3, but as built, the LCD screen just hangs on the wire. Lame. First non-calibration print, two brackets to hold it in place!
Its pretty obvious from the picture. Two brackets required. It is symmetric so two of the same works one for each side. Use a small screw, and or predrill the hole to clean it out. I did not follow this advice, used a No 6 wood screw and no predrilling, and one bracket delaminated a bit.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Bracket for LCD screen on Prusa Mendel i3 by strawdog is licensed under the Creative Commons - Attribution license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving strawdog a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure strawdog would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).