by touchthebitum, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
First attempt to mount my gps on my TBS Frame.
I used 3M tape to fix the gps on the mount. Holes are made for the long arms screws from rctimer.com
I'd like to adapt the superior plate to be well orientated.
I had little printing problems with the superior plate due to a wrong printing orientation at the start.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
gps mount by touchthebitum is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving touchthebitum a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure touchthebitum would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).