2 micro servo mount block
by odie_wan, published
Use This Project
Give a Shout Out
This is a generic mount block for two micro servos side-by-side. It's really designed to be glued down onto a flat surface, but I have make a couple of small (1/16") holes so you can screw it down. It's designed to allow the servos to be inserted from the side so you don't damage the wires
Just print it out.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
2 micro servo mount block by odie_wan is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving odie_wan a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure odie_wan would love to see what you've printed. Please document your print and share a Make with the community.