A bracket that fits to the ESS Smooth stepper PCB-board from Warp9.
This enables the PCB-Board to mounted on a 35mm DIN rail used in electrical control cabinets.
It's a remix from RobertHunt.
The 2 mounting holes are 2.5mm that fits to an M3 screw.
Printed in ABS to secure most flex on the locking tab.
It's a very tight fit to the DIN rail, and the PCB is held very secure in place.
As it's only a clip to be hidden it's printed with 0,3mm layer at 50mm/s