Limit switch mounts designed for all axes.
Four switch mounting holes for mounting in any orientation.
The length of the part is equal to the width between the rails of the maker slide, so it will not rotate on its own.
The width of the mount tapers down so that it does not interfere with the V-wheel for the +Z axis placement.
Two files included: With holes for an M3 Tap and one with M3 Clearance holes. Choose the one you need for your specific setup.
For my setup, I milled out the one with holes sized for an M3 tap, tapped M3 threads, drilled out the holes on the limit switches to be clearance for M3 screws then installed the switch onto the mount with one M3 washer between the switch and the mount. I used 1/8" clear acrylic for mine.