Useless arduino without the arduino. I had a really tough time editing
the existing STL files, so I re-drew everything except the lever. This version requires a modified servo, a DPDT toggle and a Lever Switch.
Thanks KosselOwner for the realllllly cool original design. Hope you dont mind my tinkering :)
I have printed several of these with the Makerware default settings.
Modify a servo into a simple geared motor. The mod is shown in the pics.zip file.
Solder the connections and assemble everything.
Put the lever on the servo.
Install the servo. (wiring07 shows orientation)
Align the toggle switch where the power wires are closest to the
Most of the time, the lever switch will fit tight enough to just stay in
place. If not, glue it.
The toggle switch is a 2 position double pole double throw on-on switch from RadioShack. The lever switch is just a small micro-switch with a lever (also purchased from radio shack)
Note: The toggle switches with the plastic toggles seem to be very hard to press.. I recommend using one that is all metal (easier to toggle back and forth)
Oh!! One last note. If things seem to be working backwards, reverse the power wires!!