Railway carriage in scale H0.
The idea of this carriage is to see if I could print out a H0 wagon.
To print a larger number. so I can
have a long train.
For a very low cost per wagon. obviously a purchased wagon vastly superior in quality but it will cost considerably more.
printed in ABS or PLA 0.2mm Subject
wheel axle mounting, depending on which wheels are used.
Diameter of the wheel shaft 2mm. You should try things out.
The original file is included. DesignSpark Mechanical.
Attach the hook to the coupler with a copper wire of appropriate
thickness. Electric wire about 0.5mm.