High Flow Shower Head Fan Pattern 45 degree 1/2 pipe threads .500
by Paintballmagic, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
My mini shower head was too much for the wife.. So, this one has full flow with a softer feel. Bent at 45 angle to line up with most US shower extensions. This is also made to work at multiple angles. Flip your extension pipe 180 degrees for a taller shower.
The LG suffix is the original. The no suffix file is has a scaled down fan for smaller showers.
If someone would like to mod this and install a flow control.. Have at it. The IGS file is included.
Print with the outlet port facing the build table. .1 to .2 infill should work fine. Print with more than 2 shells if your setup has gaps.
I am in the middle of printing this, thus have yet to find out how well the pattern works
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
High Flow Shower Head Fan Pattern 45 degree 1/2 pipe threads .500 by Paintballmagic is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving Paintballmagic a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure Paintballmagic would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).