This is a model of Jakiro from Dota 2. I pulled him from the Dota files, and thickened several of his body parts(wings and such).
Many thanks to Simplify3D, and Netfabb for sponsoring Deis3D, the Brandeis 3D Printing Club, where I learned how to design and print these awesome models (located in Brandeis University's MakerLab. I specifically used their software for this print.
Sliced with Simplify3D
Printed with Sainsmart Red Filament
Printed on a Type A Machines Series 1 (2014) with the following settings:
60mm/s print speed
150mm/s travel speed
230°C print temperature
The factory file attached is the exact print I did. If you own Simplify 3D, simply open it up and print it if you have a Type A Machines Series 1 2014.
I did not design this model, it was taken from Valve's models inside Dota 2. I take no credit for it's design. If you're interested in learning how to get these models, you can get the stock models from the Dota 2 Workshop. To turn those models into something printable, follow this guide.
Sadly, it is currently not possible to get files out of Dota 2, since the switch to Source 2 engine brought with it a new file format that locks all the models inside. As such, I won't be making any more Dota Models anytime soon.
All of my game models are assembled in Blender, repaired with Netfabb (They sponsor the club) and sliced with Simplify3D (they also sponsor the club) and printed in Brandeis University's MakerLab as a member of Deis3D.(The 3D printing club at Brandeis University)