Lab Hooks - push and twist to lock Ø8mm Aluminium Slot Section
by bathrobotics, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
- Slightly longer Heel. Now in Ø8mm for supporting extension cables.
Aluminium Section 80mm
These fit Standard 80mm Aluminium Section.
I've included a Combined Print STL to allow a plate to be packed better with these babies.
See the Spiggot on the upper side of the Hooks? (Nearest Front on the Thingiview which I can't seem to rearrange) - that prints upwards. That fits into a socket which is printed on the underside of the hooks.
Now ALL my lab hooks WILL fit together, but I intend the two hooks of the same sizes to be interlocked: this prevents the hooks rotating out and releasing. It's up to you!
Now available in Ø8mm, Ø12mm & Ø16mm.
This was made for the Aluminium section in our lab, which has shed loads of pneumatic pipes everywhere so this will help me organise the place.
I have printed a load of these, and they print well (See "Made").
The Heel is longer so the hook clicks better into position.
Eur Ing Andy Southern,
Design upload for 29th January 2015.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Lab Hooks - push and twist to lock Ø8mm Aluminium Slot Section by bathrobotics is licensed under the Creative Commons - Attribution license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving bathrobotics a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure bathrobotics would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).