Sliding Lid Box
by eliask, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
Small box with a sliding, shutter style lid.
Print the cases A and B upright, so that the flat sides of the box are
on the platform. For the lid, print flat with the ridges facing up.
Curl the lid around a pencil or something similar to bend it to the
right shape. Put Case A and B together to see where they connect.
Slot the lid into Case A and slide it to the fully open position.
Add glue to the connecting areas of Case A and press Case B
firmly in place. While holding the parts together slide the lid open
and closed a couple of times to make sure no glue sticks to the lid.
Recommend to be printed in ABS as PLA may not be flexible
enough for the lid. Will probably not last forever as the lid may crack after considerable use.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Sliding Lid Box by eliask is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving eliask a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure eliask would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).