Steering knuckle Power Wheels Ninja
by ivymike, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
Right-hand steering knuckle from steering linkage assembly p/n 74110-9239 (Power Wheels Ninja Quad). This is not an identical replacement but has been thickened/enlarged somewhat for strength. See installation photo for comparison of old/new.
In the end I thought this one was also not strong enough, and I made a new version which is much more robust. Please see the "remixes" of this part for details.
My son's ninja quad broke, so I drew/printed a replacement part for the steering knuckle. Installation required that I remove the left axle assembly, drill out the rivet holding the steering knuckle to the steering linkage, install the new knuckle with screw+nut+loc-tite where the rivet used to be, then reinstall the axle & wheel. It turns out that replacement steering linkages are available online for about $11+shipping (including LH + RH knuckles and linkage w/rivets installed) so the effort may not be worth it for you. See power wheels part 74110-9239 (google).
I printed this with 50% fill and have had good luck so far.
Well, I take that back. After a few weeks of driving and a few big crashes, this one too was broken. I remixed it and made it stronger. See the links for remixed versions.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Steering knuckle Power Wheels Ninja by ivymike is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving ivymike a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure ivymike would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).