Simple Mutable Insruments Shruthi-1 case
by diycrap, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
This is a very simple case for the Mutable Instruments Shruthi-1 DIY synthesizer. Inspired by thing:284637 but completely different and takes only about 3 hours to print.
This design includes a front panel design in which you can print out on paper, laminate and glue to the front.
More info is provided on:
- Print the three parts.
- Use M3 standoffs to fasten the shruthi-PCBs to the bottom part.
- The back plate is secured with the jacks
- Mount the front panel.
- Print out the front panel overlay on a nice paper, laminate it and glue it to the front panel.
- Fasten the potmeters to the front panel.
It cant be simpler than this.
The OpenSCAD-file is provided. It is easy to change the openings for the buttons etc in case your buttons are of a different size.
By the way; the Shruthi should ideally be powered by 9V DC although the panel design states 12V :-)
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingTools and Utilities
Repair, slice, or enhance this Thing
Simple Mutable Insruments Shruthi-1 case by diycrap is licensed under the Creative Commons - Attribution - Non-Commercial license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is not allowed.
Show Some Love
Say thanks by giving diycrap a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure diycrap would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).