Up! Mini Filament Tube End Bracket
by YoungBuck, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
This replaces the stock Up! bracket, and the replacement Up! bracket.
It holds the end of the filament tube securely in a hex recess, and provides a generous chamfered lead-in to make blind feeding behind the case easy. Plus it's a bit easier on the eyes than the stock version.
Nip off the 2mm spacer norker I put on the side to keep it from sticking to the raft.
Unbolt the old Up! bracket and toss it into the ABS recycling pile.
Bolt this on in its place.
Insert the end of the filament tube into the hex recess and push it home.
Feel awesome about yourself.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Up! Mini Filament Tube End Bracket by YoungBuck is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving YoungBuck a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure YoungBuck would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).