Loading
chickenbisket

Xbox 360 and Xbox One Controller Holder

by chickenbisket Mar 28, 2013
Download All Files

Thing Apps Enabled

Please Login to Comment

excellent! i dont have to pay $6 for one hanger :)

Cool thing. Holds Steam Controllers good too.

I had to superglue the arms into the backplate or the edges bow out under weight.

I might re-mix it. the screw holes should be at the center or the top instead of the bottom.

I Can't dimension it in inventor. Can someone tell me the dimensions so I can make a remix add on?

I'm having an error when downloading, not sure if its a Thingiverse problem. Can anyone send them to me to help out?

Slight design flaw I've noticed: There's a lot less plastic from the holder to the edge, and the weight of the controller pulls it forward a bit. I think you'd need to have a symmetrical design, with the middle chunk of plastic holding in both arms.

This is great! Only 2 things I would change. Put the screw holes on the top and notch out the bottom where the arms touch the back plate so it fits better and is flush on top. I had to notch out the ones I made so everything was flush. But over all very awesome!
I printed out 2 of these on a Wanhao Duplicator 4s,
I used ABS Glow in the dark green.
35% infill, 4 shells .20mm Layer Height
Extruder 230C Build plate at 85C
Speed while Extruding 90mm/s, Speed while Traveling: 120mm/s

My four xbox controllers look glorious hanging off the side of the entertainment center with these. I just wanted to thank you for such a simple, modular and easily printable design. Well done.

I really like this holder the only problem I found is that the arms don't fit flush, I have edited the STL and made it so they fit better. Thanks!

If you still have your edited STL of the arms you should submit it as a remix of this.

This is fantastic! I'm printing 4 of these right now for the Nerd Cave Bedroom (http://barnnerd.comhttp://barnnerd.com). Any chance you could modify the model to fit a PS3 and PS4 controller? Then I can mount 100% of my console controllers since the XBOX 360, XBOX One and Ouya all fit your current design well.

can you dimension the base so I can make a model base to hold the base of the arms.

Not sure if you still need it, but I made some PS3 controller arms: http://www.thingiverse.com/thing:285076http://www.thingiverse.com/thi...

PS3 Controller Holder
by kazy

I'm glad you like it. I don't have a PS3 or PS4 but if you can get me measurements on how far apart the arms need to be or if they need to be a different shape i can modify the design for you.

great design. I'm printing some out right now.