Arduino (Uno) Altoids Insert
by schlem, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
Put your Arduino in an Altoids case. This has blocks that hold the PCB and can be "melted" with a soldering iron or similar to keep the PCB in place. Also, there are 2mm holes that can be drilled out to your preference to use screws to hold the Arduino in place. There is 3 mm of space under the PCB, ample room for wires and leads underneath.
Access for USB programming, power, or other connections will necessitate holes through the Altoids tin, but I leave that as an exercise for you, gentle maker.
Printed with 3 perimeters and 50% infill. There is not a whole lot of infill, given the thickness of the part, but a little in the mounting pads. Let it fully cool for maximum flatness before prying it from the printing bed.
Select a service to print this Thing and ship it to you
Arduino (Uno) Altoids Insert by schlem is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving schlem a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure schlem would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).