Soft Jaws for a four inch bench vise
by tomlombardi, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
Soft jaws are used in a vise to clamp an object without marring its surface.These soft jaws have a flat face and magnet inserts that help keep them in place on a four inch vise.
I printed this thing in PLA using .25mm layers at 25% infill (standard settings) on an M2. You'll need to print two. I used two cheap 1/2" diameter magnets I bought from my local Ace hardware store, just press them into place.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Soft Jaws for a four inch bench vise by tomlombardi is licensed under the Creative Commons - Attribution license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving tomlombardi a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure tomlombardi would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).