Additionally you need:
1x 10mm diameter rod, 500mm long
3x 6mm diameter rod, 160mm long
6x 6mm diameter rod, 250mm long*
- of course you can vary the length to what you like. Given are the lengths I used.
Print the top and bottom. I printed it without support (I added thin ridges to the top part as support material).
Stick a 11mm rod in the bottom hole and in the top hole.
Stick three 6mm rods in the bottom part. It will make a nice tripod.
Stick six 6mm rods in the top part.
Ready for use.