PRUSA i3 Steel with 12"x12"x12" work area DXF Files included for it
Designed to use the common 10 Gauge steel found in the U.S.
Can be setup with either V slot or traditional round rod Guides
handy for upgrade from smaller units
The correct mounting holes for the PSU 4mm mount four patterns
1, First pattern for Chinese s-360- 12
2, Second pattern Mean Well Power Supply RSP-500-12 recommended
3, Third pattern for Mean well Power Supply RSP-750-12
4, Fourth Pattern for Mean Well Power supply RSP-1000-12
Generic X plate included for V slot configuration
X plate motor mount and idler plate included v slot configuration
Top has additional mounting points for different accessories
Most other PRUSA i3 steel accessories interchange except Y idler prints
Downloadable free version is Based on my Prototype
It does not support full 12" X or Z travel with dual extruder
Should be able to achieve 12" on X and Z with single extruder depending on style.
Does not include spool mounts,
Does not have provisions for Y-axis lead screw capabilities
It is based on my prototype some tweaking may be required,
Cutting of V slot is necessary to fit
Download latest version for minor upgrades
Z rod brackets now match Paid version as does the bed and Y belt mount for stability.
very little plastic used in this printer set up as a V Slot
most hardware purchased from open builds store
Cheap Chinese PSU NOT recommend, to much power draw with 12" bed
Recommend printing some upgraded parts once up and running
1 Search for NCS Stuff for recommend parts
2 Highly recommend Z Travel end stop
3 Y Axis belt mount, metal one provided is intended for temporary use it sucks recommend printing NCS one as soon as possible
4 Y Motor Spacer for single plate motor mount
5 some feet http://www.thingiverse.com/search?q=592637
If built as V Slot version and using the micron extruder no printed parts needed to get up and running.
1, Free version will need extruder mount of sorts to get up and running.
Remember to come back and post what you've printed as Make.
It's good for the designer and the community (that means you)!
To post a Make, come back to this Thing and click Post a Make.
Or, you can use the Thingiverse Mobile app found on
and the Apple App Store.