Marble Challenger 2
by slai98, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
Marble rolling toy
Put a marble in the starting location shown in the first photo, and try to roll the marble into the hole at the top without allowing the marble to fall into the larger pits. You can either hold it with your bare hands, or you can place it on a ping pong paddle.
This design has several improvements over Marble Challenger 1, including:
-a base to keep marbles from falling through the bottom of the toy
-a rim around the top edge to keep marbles from falling from the edge of the toy
-a larger finishing hole to better accomodate marbles
-a reasonable difficulty level (I couldn't finish Marble Challenger 1 after about 300 tries, but I finished Marble Challenger 2 after 10 tries)
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Marble Challenger 2 by slai98 is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving slai98 a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure slai98 would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).