Loading

Hey! This thing is still a Work in Progress. Files, instructions, and other stuff might change!

Dual 18650 box mod with Tomorrowland logo

by 90AWDeclipse, published

Dual 18650 box mod with Tomorrowland logo by 90AWDeclipse Feb 23, 2015
0 Share
Download All Files

Thing Apps Enabled

Order This Printed View All Apps

Contents

A part of these Groups

View All

Use This Project

Give a Shout Out

If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.

Print Thing Tag

Thing Statistics

11162Views 1376Downloads Found in DIY

Summary

First working version of my box mod. I used around the house parts to test fit and get working. Don't mind the burnt wire or the wonderful soldering, this is a low quality print so I did low quality work. If you build this and assemble it make sure to use a mosfet or keep your builds high. I have a 5amp switch so I won't build any lower than 1 ohm. Happy vaping.

Parts list

-battery contacts from a xbox controller and from several old tv remotes

  • 12ga wire (way to big but all I had)
  • Top cap off my copper mech mod
  • 5a switch from an intercooler sprayer iv'e had since 2006
  • solder that's made for copper pipes

Lid is press fit and works well, but it will most likely wear out over time.

Printed on robo 3d with PLA

Low settings
.03mm layer
20% infill
210 degree extruder
50 degree bed

Instructions

Low settings
.03mm layer
20% infill
210 degree extruder
50 degree bed

More from DIY

view more

All Apps

3D Print your file with 3D Hubs, the world’s largest online marketplace for 3D printing services.

App Info Launch App

Auto-magically prepare your 3D models for 3D printing. A cloud based 3D models Preparing and Healing solution for 3D Printing, MakePrintable provides features for model repairing, wall thickness...

App Info Launch App

Kiri:Moto is an integrated cloud-based slicer and tool-path generator for 3D Printing, CAM / CNC and Laser cutting. *** 3D printing mode provides model slicing and GCode output using built-in...

App Info Launch App
KiriMoto Thing App

With 3D Slash, you can edit 3d models like a stonecutter. A unique interface: as fun as a building game! The perfect tool for non-designers and children to create in 3D.

App Info Launch App

Print through a distributed network of 3D printing enthusiasts from across the US, at a fraction of the cost of the competitors. We want to change the world for the better through technology, an...

App Info Launch App

Quickly Scale, Mirror or Cut your 3D Models

App Info Launch App

3D Print a wide range of designs with Treatstock. Easy to use tools to get the perfect result. The global 3D printing network that connects you with high-quality and fast working print services nea...

App Info Launch App

Few Tips for printing in abs. If your printing thin >.2 layers speed it up. I print at 235-260(depending on color) and Bed:100 and use Aquanet Hairspray ($2). If you don't have a heated bed you may want to try blue tape but be sure to wipe it with some kind of solvent to remove the waxy layer. If you can keep your print area enclosed also. I got 2 spools of pla when I bought my first round of filaments and I've never touched it. I have had thin walled abs prints warp in my car here in Florida.

Thanks for the tips. I have printed some things in abs now, and I really like the abs juice. After a print I just add some more juice and smooth it back out. I don't have an enclosure but I do have a heated bed. Bad thing is it only cranks up to about 80 degrees.

After reading again noticed you printed with PLA, so how does that hold up?

On this build I wasn't running sub ohm because of the switch, but I never felt anything get hot. I printed one of these for a friend and he used a similar setup with 16 gauge wire. He was running a .4ohm build and he said it never gets hot. My only concern with the PLA for this application is when you leave your box mod in the car on a hot summer day. That will most likely be hot enough to disfigure it. I'm currently working on printing with abs, but It's a lot more challenging than PLA. Honestly PLA was pretty much prep and print for me. I never really changed the factory settings besides quality. I will have another mod posted soon which will be in ABS.

-Alex

I've 3D printed quite a few box mods before; A sliding-top lid with a tongue and groove system will last forever. Not too difficult to modify your existing design. Might want to keep it in mind for your next revision.

Thanks. I'll have to try it out on the next build

How do the ABS boxes hold up with heat from the RDA and what not? any melting at all? I build pretty low on unregulated devices so the heat concerns me.

Top