Loading
systeminnnakagomi

Cat type bookmark

by systeminnnakagomi Feb 23, 2015
Download All Files

Thing Apps Enabled

Please Login to Comment

I wasn't able to print it as is. At least in ABS, the result is too thin and bends/breaks easily. Also with 0.4mm nozzle, the details are too small and the resulting print fragile. Perhaps using a 0.2mm nozzle can fix it.
But scaling it by: 300% on Z axis and 110% on X and Y made a pretty good print. 0.16mm layer height is the maximum suggested value. Better 0.1mm.
Nice design, anyway, thanks for sharing.