Compact Dice Tower

by MementoMori Feb 27, 2015
Download All Files

Thing Apps Enabled

Please Login to Comment

I just fixed Saiyanslayer's model, mine's just a remix.

Anyhow, they're only fault is not attributing the work to the designer. This has no NonCommercial license, so they can sell it.

How well does it hold up? (I'll be using PLA)

I made two in PLA and they’re fantastic. The only downside is that PLA is quite noisy

Those are some long bridges. You didn't have to print this with supports everywhere?

I you turn it 180 degrees and print with support on buildplate there are no bridging.

180 degrees in which direction?

Flip the tower so the rounded part is up.

My printer is awesome at bridges, that’s why I didn’t need any

This is a great design. Have you considered making it completely enclosed when folded up so it could be a dice box too? I may try my hand at that.

I didn't do the actual design, I just fixed some geometry issues. However, I tried to make it enclosed, but it required more time that I have and didn't finish it.

It works perfectly! Thank you for your job!

Dice tower is great for d6's only. Increase scale by 15% to allow standard size d20's to roll through.

There are two dice tower models, the original one and the dicetower_small one. In the second I made the inner slopes smaller so d20's and bigger d6's don't get stuck inside.

I printed the one labeled small and d20s are a no go :(

Just uploaded a new picture showing a d20 inside the dice, by the slope. I don't know if you had any trouble with the scale of the print, or if there's more than one d20 size. All the d20s I own are "standard" size, as the one in the picture.

In the picture is not too clear, but there should be a 5mm gap, approximately.

I rechecked and the "small" is for smaller dice. For d20s, print the standard.

Comments deleted.