Spaghetti measuring tool
by tammo66, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
This is a usefull tool to measure how much spaghetti you need. There are multiple holes for 1 to 4 persons.
I printed this using the following settings:
- Abs plastic
- 0.25 mm layer hight
- 245 degrees celcius extruder
- 65 degrees celcius print bed
- 3 shells
- 25% infill (honeycomb)
- 30 mm/s perimeter speed
- 50 mm/s infill speed
- no support material
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Spaghetti measuring tool by tammo66 is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving tammo66 a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure tammo66 would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).