A extraordinary beautiful phone stand that can also be used as a charge station/dock. You can of course also use just as a cool decoration.
A phone charge cable can be put into it from the back. There is a adapter that holds it and fits into the slot of the head. The teeth are printed separately and put into the teeth flesh slot. The tongue can be used as a cap.
You can choose from different teeth and adapter that fit your smartphone.
Check out the textured version on Sketchfab: https://sketchfab.com/models/3d346cad931648dfa64c6b8bc9fdfb46
Print requires support (mainly for the ears)
For using it as a phone stand:
Choose the teeth that fit your smartphone, note that there is already some tolerance and it is not really a problem when it has 1 or 2 mm space. The teeth hold pretty good without glue but it is still better to glue them on.
Following gaps are available
- 7.6mm (like for iPhone5)
- 9mm (like iPhone 4)
- 7.2mm (like iPod 4th gen)
- 6.2mm (like iPod 5th gen)
- 10 mm
- 12 mm
There are also 2 versions of the tongue in case your need the thinner one: BiteMonster-Tongue-7.6mmThickness-fin and BiteMonster-Tongue-6.1mmThickness-fin
For also using it as a charge station:
The adapter comes as a perfect fitting Apple adapter (26 x 6 x 9mm):
And a universal version (for the usual cable comes out of the back):
- BiteMonster-Adapter-Universal-part2-FORca7mm-fin.stl ...
The different mm sizes should be ca the size of your thing without the part that will be inside the phone. Doesn't have to be exact, it can also be higher sticking out.
That version works with clamping the cable. It will not dock as smooth with it since it can still rotate a bit in it.
But you can also make your own perfect fitting one. I included the .obj files for all the adapter versions. Just make sure then to also include some tolerance. They are in the extras.zip
There is also a version for a adapter where the cable comes out at the side: