Pressfit Arduino Mood Light
by Whampus, published
Use This Project
Give a Shout Out
Press-fit Arduino mood light with 7 different modes controlled by buttons.
Designed for 1/4" plywood
download code at http://mattnupen.github.io/Arduino-Mood-Light/
Design for the base was derived from Nathan's Bamboo Prototyping board - http://www.hahabird.com/2012/09/bamboo-prototyping-board/
Kiss cut red lines, vector cut black lines.
Glue the two base layers together and use 4/40 screws and nuts to attach Arduino to the base. Designed for a half breadboard with sticky backing to be placed on right side, next to Arduino.
Circuit design is attached as a pdf and fritzing file.
Arduino Code found on the github page: http://mattnupen.github.io/Arduino-Mood-Light/
Cut Vellum paper to diffuse light from openings
More instructions coming soon
Upgrade this Thing with Thingiverse Apps
Pressfit Arduino Mood Light by Whampus is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving Whampus a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure Whampus would love to see what you've printed. Please document your print and share a Make with the community.