Aruba Networks AP Bench Stand
by jsnyder81, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
This is a bench stand for the Aruba Networks 802.11ac access points (205, 215, 225).
The idea is to keep it off the desk so you don't break your cables, or have the AP wobbling around on your desk. Designed for home labs, where APs are likely not to be ceiling mounted.
Not for permanent installation!
Derived some of the base from Things 521959.
Updated: Found curl was aiding in fit. Without fit needed some friction guides to make for a tight fit. Added 3-15-2015
Updated: Uploaded non-manifold file. Fixed and corrected.7-27-2015
Printrbot Metal PLA
20% rectilinear infill worked well. You can make the infill higher if you need more weight.
Suggest putting some felt on the bottom to prevent it sliding so easily.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Aruba Networks AP Bench Stand by jsnyder81 is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving jsnyder81 a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure jsnyder81 would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).