Soda Fridge Pack Tray/Caddy
by Jeepguy42, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
A soda Caddy for the standard 12 Pack boxes of soda. Made for a standard 12 FL OZ aluminum can. Made in multiple parts that should print on any printer with a build area capable of printing 6" x 4" (152.4mm x 101.6mm). Will need gluing once printed. I have a large format version which prints the entire setup at 8" x 18" if you have a printer that can print that big (zipped File). Again this is not tested but it should be good as a soda can is fairly standard now.
Print one of each part except the part labeled wall peg. You'll need 22 of these if you use them to assist in lining up the walls. To assemble the walls you'll need to glue the parts together (no tabs so a flat surface will be needed). There are lines on the individual pieces. These lines line up on adjacent parts. If you use the Wall_Peg.stl you'll need to apply glue to the edges of the wall part and then to the wall peg itself and inset it into the grooves on each part. This should give it some strength in the walls. All the R parts are for the Right wall and the L parts are for the Left wall. Match the lines up.
The ramps and the back piece has slots built into them that match up to the tabs on the wall parts. apply a small amount of glue to the slots and then insert the tabs from the corresponding pieces. Once everything is together, give ample time to dry and then it should be usable.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Soda Fridge Pack Tray/Caddy by Jeepguy42 is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving Jeepguy42 a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure Jeepguy42 would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).