Siamese Twin Vase
by Zebra404, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
Please don't forget the Like-button if you download this model. I appreciate it.
This vase was designed with http://shapeshifter.io.
You can watch a short time laps movie at https://www.youtube.com/watch?v=UAUIIl4kMNU?vq=hd1080
Read the instructions for information about my printer settings.
I printed the 3d-model with my Felix 3.0 (single extruder) 3d-printer.
No support was used but I used mouse ears on four corners to prevent warping.
Used software: Slic3r version 1.1.7
Temperature extruder: 210°C
Temperature printer bed: 60°C
Printer nozzle diameter: 0.5mm
Layer height: 0.14mm
First layer height: 0.35mm
Infill density: 10%
Perimeters speed: 60 mm/s
Solid fill pattern: rectilinear
Top solid layers: 3
Bottom solid layers: 3
Build time: 9 hours 13 minutes
Filament length: 34086.9 mm (34.09 m)
Plastic volume: 81988.49 mm³ (81.99 cc)
Plastic weight: 102.49 g (0.23 lb)
Tools & Utilities Apps
Repair, slice, or enhance this Thing
Siamese Twin Vase by Zebra404 is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving Zebra404 a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure Zebra404 would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).