Hey! This thing is still a Work in Progress. Files, instructions, and other stuff might change!
FRC encoder mount adapter
by ryanbacon, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
This encoder mount allows teams to mount encoders to toughboxes using screws.
These mounts hold encoders on toughboxes very well, but please be cautious when you remove them, as the tabs can break very easily upon removal!!
Enjoy and good luck in the competition!!
you should to be able to print this with abs or pla plastic. Please note that this will hold encoders on strong, but you must be very careful when you remove them so that you do not damage the encoder mounts.
You will need to hit the in -> mm button or scale this by 25.4
Good luck in the competition!!
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
FRC encoder mount adapter by ryanbacon is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving ryanbacon a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure ryanbacon would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).