A direct drive bowden extruder for 3mm and a MK7 style hobbed pulley (BEARING 608ZZ)
by depri51giu, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
A direct drive bowden extruder for 3mm and a MK7 style hobbed pulley. The SketchUp Make is almost completely parametrizable, so it can be adjusted to fit other hobbed pulleys as well. I have used a 11x12.5mm, 5mm bore brass hobbed pulley, because it was easy to acquire in Reprapworld .
1 MK7 DRIVE GEAR
1 MOTOR NEMA 17
1 BEARING 608ZZ.
3 SCREW 3MAX8MM.
1 SCREW 3MAX30MM.
2 PLATE ALUMINUM 30X7X3MM
2 THREAD BARS 3MAX60MM
2 SPRINGS 4x15mm
2 NUTS 2 BLIND 3MA
2 FLAT WASHERS 3.5MM
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
A direct drive bowden extruder for 3mm and a MK7 style hobbed pulley (BEARING 608ZZ) by depri51giu is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving depri51giu a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure depri51giu would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).