This is another member in the Safe and Secure Raspberry Pi family of cases. It is a direct descendant of the B+ case I made not too long ago, and is meant to house a Raspberry Pi 2 B board.
This model contains only 4 modifications compared to his ancestor. I simply made the countersunk holes for the screw heads bigger, by .25mm. The rest of the case is quite the same, with .2/.25mm tolerances. The tightness of the screws was the only complaint I received on the prior model, so it’s the only thing I changed.
Since this new board will be able to run Windows 10, I also made a new top part with a Windows logo.
If you are looking for the other case in this series, they can be found there:
Original Raspberry Pi B:
Raspberry Pi B+:
Raspberry Pi A+:
Raspberry Pi 3 & 2 B:
Update, added new gpio top upon request.
Update 2, added 40mm and 50mm fan top upon request.
Update 3, many who print this case in ABS have said they printed the case at 101% of its size to account for shrinkage during ABS cooling.
Update 4, added a 4mm longer plain bottom and plain top to remove access to the SD card from outside the case.
Choose a top and bottom part, and print them a .25 layer height.
Use 4x M3 20mm socket head screws to secure the case together.