Bounce Flash for Sony A6000
by Eckerput, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
This little piece slides into the flash socket on the Sony A6000 camera to hold the flash up. This allows the flash to bounce off the ceiling instead of hitting the person directly. A bounced flash produces a less harsh image. Obviously no support is needed, and normal fill levels are fine. The hole allows you to hook it to your camera or lens cap strap so it is always there when you need it. It may work on other Sony cameras providing the flash design and socket position are similar. To use it, pop up the flash and hold it back with your finger, slide the piece into the flash socket and then rotate until it holds back the flash on its own.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Bounce Flash for Sony A6000 by Eckerput is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving Eckerput a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure Eckerput would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).