Hey! This thing is still a Work in Progress. Files, instructions, and other stuff might change!
Da Vinci Cura Settings - repetier 0.92
by tecan, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
after the first layer turn bed off.
ABS does work with PVA using the gluestick file. but it likes to pop off if the glass goes below 75. so we might have to lay down at a cooler temperature to keep it stuck.
also if your print is comming off the bed a little hotglue at the base will ensure it stays in place.
http://netpipe.ca/netpipe/?page_id=307 for more pictures and stuff
replacement hotend so you can print PLA without having issues.
i switched to http://www.homehardware.ca/en/rec/index.htm/Paint-D%C3%A9cor/Paalso turn the hotend turn down to 208-209 after the first layer. inting-Supplies/Tape-Glue-Adhesive/Adhesives-Glues/White/GLUE-WHITE-NATURA-950ML/_/N-ntmadZ1r4p8f/R-I2020510 this stuff and its amazing,.
use this method https://www.youtube.com/watch?v=FuQ2EabKBDo pvac for pla and bluetape for ABS seems to be the combo that works great for me.
new pvac - pla v3 settings i've been using 208 and 60 for the bed temp since switching to this new glue from homehardware.
while printing pla and abs i was getting lips on the bottom of my parts, put this in the gcode.start its included in V8 pla pvac file. its scalable for speed i've had it 150+ % to under 50% running fine. run at 80% for the default 0.37 layer or set to 0.25 - 0.35 and go 100% 150% + speed
G28 Z0 ;move Z to min endstops
G92 Z0.3 F200 ; bed height start
G92 Z0 ; 0.4 for blue tape
i tried orange pla from reprapwarehouse.com and if i was lucky enough to get the first couple layers down it would jam up midprint. http://www.reprapwarehouse.com/collections/pla-filament-1/products/fluorescent-green works great at highspeed 0.37 thick layers. though it has issues with sticking to bare glass. then they switched the product on me it stopped printing like i wanted.
https://www.youtube.com/watch?v=ZQBlNrecxlI video of the pva v8 setting at 140% speed never jams enough to stop a print just keeps on going even for whole plates of stuff.
repetier 0.92.3 << has some new updates i've not encorperated into the settings like jamsensor checking and autolevel matrix fixes.
also i've bumped into jamming issues when using the CSG in blender, hard to find artifacts after a lift retract it try's to push out an insane ammount of filament quickly. not sure if its zero faces or face winding... check my double harringbone model file from other project if you want to see first hand.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Da Vinci Cura Settings - repetier 0.92 by tecan is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving tecan a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure tecan would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).