Y endstop support for Igus WS10 rail
by Bogomips, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
This support is for the mechanical endstop board from reprapdiscount.com to be mounted on the Igus Drylin WS10 rail.
So it is really specific to my needs.
The small layer supports need to be removed (Dremel) to leave the room for the pins soldered crossing the circuit board.
The small cube is a pad used to protect the rail from the damage of the tightening screw.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Y endstop support for Igus WS10 rail by Bogomips is licensed under the Creative Commons - Attribution license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving Bogomips a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure Bogomips would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).