DryErase Bright Crayon Holder
by gmo00777, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
I had modified the cardboard box the crayons came in by cutting, taping, stapling and adding a magnet to keep handy at my whiteboard.
This thing will replace the cardboard box the crayons are packaged in. The holder also has a place to install the sharpener that comes integrated on the back of the box and has a place to store the Eraser Mitt. The back has a recess to fix a magnet (I used some old hard drive magnet) with double sided tape or glue.
The dovetail feature at the bottom is intended to accept a shavings catching drawer that has not been designed yet. The Sharpener hole should be increased just a bit to accept it easily and the cavity should also be increased so shavings don't get stuck.
Other wise it works fine. Enjoy and post your improvements.
Printed on Low Resolution settings. It turned out OK with minor warping at the bottom.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
DryErase Bright Crayon Holder by gmo00777 is licensed under the Creative Commons - Attribution license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving gmo00777 a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure gmo00777 would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).