This is a replacement front body mount for the Audi R8 LMS bodies for Kyosho Mini-Z RC models. You can print and use this replacement if your stock front body mount breaks and you cannot find an original replacement or don't want to wait for such to arrive. The body holder should be a perfect fit and provide enough strength and durability.
Designed by http://minirc-project.com/
You need to print the body holder with support structure in order for the print to turn out good as there is a part of the body holder that is in the air. You can vary the infill percentage, but even with the default settings the part should be strong enough, no need to go to maximum infill percentage. We recommend to use 0.1mm layer height for best results, though you might experiment with not so fine resolutions as well.