Pants for Makey Makey
by DangerLaser, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
An acrylic and neoprene case for Makey Makey. Lasercut or 3d printed. Designed to be picked up and held.
Open source. CC-BY-SA.
You will need the following purchased parts:
M3 x 16 mm Screws
M3 Lock nuts
O rings (optional or print with NinjaFlex)
Print or laser cut your front plate and back plate. Print (ninjaflex) or cut (neoprene) your gaskets. Print (ninjaflex) or purchase O-rings.
Add O-Rings to Makey Makey. Assemble front plate, gaskets, Makey Makey, and back plate.
Use the M3 screws as intended and tighten nuts.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Pants for Makey Makey by DangerLaser is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving DangerLaser a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure DangerLaser would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).