ZMR250 Camera Tilt Mounts (also suitable for Blackout Mini H)
by IdefixRC, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
I took the excellent design from Pilotboy, made the holes smaller and added standoffs to the back so that a board cam can be screwed on directly from the back without the need for additional nuts or spacers and added 2 additional degrees.
tilt angles available - do note that the 35 degree tilt will require you to make a significant cout out in the top plate of your ZMR250 as half of the picture will otherwise be blocked by it:
- 10 degree
- 15 degree
- 20 degree
- 25 degree
- 30 degree
- 35 degree
print with 20% infill.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
ZMR250 Camera Tilt Mounts (also suitable for Blackout Mini H) by IdefixRC is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving IdefixRC a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure IdefixRC would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).