Minimal Ramps1.4 cable and 80mm fan support
by Louis_Cypher, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
A minimum effort approach (in particular in terms of printing effort) to organize cables using zipties and the hole patterns, and to fix a 80mm fan on top of the RAMPS board. Fits with full graphics display connector. Please check whether your adapter fits. About four hours building time in total at 0.1mm and 50mm/s speed.
P.S.: The fan model on the rendering is taken from: https://grabcad.com/library/pc-fan-80x25-mm-1, the Ramps 1.4- Model from https://grabcad.com/library/gadgets3d-starter-pack-ramps-1-4-elettronics-for-3d-printers-1
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingTools and Utilities
Repair, slice, or enhance this Thing
Minimal Ramps1.4 cable and 80mm fan support by Louis_Cypher is licensed under the Creative Commons - Attribution - Non-Commercial license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is not allowed.
Show Some Love
Say thanks by giving Louis_Cypher a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure Louis_Cypher would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).