I uploaded the battery support and the STL for closing the USB access hole (soporte_bateria.STL and tapa_hueco.STL)
I have made another upgrade, it's for users who doesn't have a printer bigger than 20x20cms (like Prusa i3). Some of them asked me to change the design. I have uploaded 5 STL files in order to avoid this problem. You can now also download the 2 chasis splitted in two parts and also a link part. For the bottom chasis the files are chasis01half?.STL, where ? is a (left) or b (right). The same is for chasis_tophalf?.STL. To link both parts you need to print 4x chasis_half_link.STL. You'll need also 16 M3 Screws.
More from Robotics
Save to Dropbox
If you’re logged into Dropbox, you can save directly to Dropbox.
Show Some Love
Say thanks by giving malopezn a tip and help them continue to share amazing Things with
the Thingiverse community.
Remember to come back and post what you've printed as Make.
It's good for the designer and the community (that means you)!
To post a Make, come back to this Thing and click Post a Make.
Or, you can use the Thingiverse Mobile app found on
and the Apple App Store.