by walter, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
Small hammer for knocking parts off the build plate. There's a .15mm gap between the handle and the head, you may need to rescale, sand, or glue to get it to fit depending on your printer/settings. There are two sizes of hammer, the handle for the small and large hammers are almost identical and probably interchangeable.
I'd recommend printing the head at 100% infill to make it heavy enough to be useful (or you can try a denser filament).
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Hammer by walter is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving walter a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure walter would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).