Jurassic Park Gate Remix-Remix
by mb20music, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
This is about 150 mm wide when assembled. You can upscale it if you want it larger of course...
Some of these parts are really small so you will need to print at your best possible quality settings.
For the upper support/sign you will need to change to yellow filament @ 6.22 mm and then change to red filament @ 7.95 mm.
You can super glue the upper support/ sign to the two pillars and it will hold everything together very securely.
The file named torch holder top for some reason isn't scaled properly. You will need to rescale it to .03937 in your software for it to be sized properly.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Jurassic Park Gate Remix-Remix by mb20music is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving mb20music a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure mb20music would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).