Hey! This thing is still a Work in Progress. Files, instructions, and other stuff might change!
Kyosho Mini-Z MR-02/MR-03 Wheels (0 offset)
by 3dprintingblog, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
Just a quick try to make usable wheels for Kyosho Mini-Z RC car, these are for MR-02 or MR-03 models, will not fit on AWD. Standard wheels with 0 offset, front and rear wheel. Do note this is a work in progress as it may need a little bit of fine tuning on the inside where you place plastic bushings or bearings. You need to print with finer resolution such as 0.1mm for best results and use support material for the inside to print well.
Designed by http://minirc-project.com/
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingTools and Utilities
Repair, slice, or enhance this Thing
Kyosho Mini-Z MR-02/MR-03 Wheels (0 offset) by 3dprintingblog is licensed under the Creative Commons - Attribution - Non-Commercial license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is not allowed.
Show Some Love
Say thanks by giving 3dprintingblog a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure 3dprintingblog would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).