Castle dice tower with moveable gate
by LennartS, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
This is a dice tower for all dice playing board games. The gate can be lifted up so the dices do not roll on the table. No support structure needed when printing, however, requires a calibrated printer.
Update 25-09-2017: New version uploaded. High and low resolution with added window borders, plant and better front gate. Small hole also added on the bottom for a small light for the dungeon.
Created in Solidworks
Update: Version 3 is up.
Printed on UM2 with 0.15mm layer PLA and ABS. Remove support when done. Took about 22 hours to make.
Small sized dice tower is about 10 cm in height without buildtin support. (Recommended for small printer)
Castle_w_top_w_support_V2.STL is a full size dice tower with a larger platform at top and with builtin support. (Recommended for larger printer)
Castle_no_top_w_support.STL is full size without the top and with support for the arc.
Castle_w_top_no_support.STL is a full size dice tower without the support structure in the arc.
Tools & Utilities Apps
Repair, slice, or enhance this Thing
Castle dice tower with moveable gate by LennartS is licensed under the Creative Commons - Attribution - Non-Commercial license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is not allowed.
Show Some Love
Say thanks by giving LennartS a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure LennartS would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).