Plastic corrugated Skull, Spliced With the AutoCad123D Program( Its free! )
I Made the skull out of scrap 4mm Polypro ( plastic cardboard )
The .DXF file is a layout to cut all the pieces at once.
The parts are also labeled from 1-53
Pieces were cut using a Kongsberg CNC Cutting table.
Dowel used to align pieces, I recommend gluing all the parts starting from the middle out.
Any questions feel free to ask!
Material should be aprox 4mm thich
Approx 53 layers all together.
Aligned with dowel, fastened with glue.
Parts are laid out on one sheet approx 100" x 35".
( you can always separate the parts to use smaller sheets)