Accessory holder for Shoulder Rig
by MarcusWolschon, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
This is a modiciation of the T-connector to carry a trapped 1/4" bolt.
This way you can attach any accessory that has a 1/4 tripod nut or (with a cheap hotshoe-adaptor) a hotshoe-connection to your industry standard 15mm DSLR shoulder rig.
e.g. an external microphone, audio recorder, camera lights,...
project in my personal wiki:
IF YOU HAVE NO ACCESS TO A 3D-PRINTER AND CAN't FINE SOMEONE ELSE TO PRINT THESE FOR YOU, YOU CAN HAVE SHAPEWAYS PRINT THESE FOR YOU:
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingTools and Utilities
Repair, slice, or enhance this Thing
Accessory holder for Shoulder Rig by MarcusWolschon is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is not allowed.
Show Some Love
Say thanks by giving MarcusWolschon a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure MarcusWolschon would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).