These are the STL files for the printable parts of the BI V2.5 Belt Conversion Kit design in collaboration of JFCouture and Boots Industries.
3 X GT2 20T Pulleys with 5 mm bore
6 X F608ZZ bearings
3 X pre-cut GT2 belt (6 mm wide)
3 X Idler Assembly (3D Printed)
3 X Carriage Assembly) (3D Printed)
3 X endstop flags
3 X Tension blocks
6 X M5 to M8 Adapter for F608ZZ (3D Printed)
3 X M3 nut
3 X M3 x 40mm
Instructions for installation can be found here.
Looking for PLA? We offer unmatched 1.75 PLA print quality with our SP Series PLA.
You'll need to print:
3 X Block
3 X Idler
3 X Interrupter
3 X Tensionner
6 X M5 to M8 adapter
Print at 40% infill with PLA or ABS, a 0.4 mm nozzle is recommended with 0.2 mm layer height.