Designed to protect your mobius when crashing. Keep in mind it really depends on just how hard you crash. So far we haven't killed a mobius camera just by using these protectors.
All of our Mini Quadcopters use these protectors. Will add a link to video on these soon.
Note: There are two files included, one for Standard Lens and the other for Wide Angle lens. Also use either 0.2 layer height or 0.1mm
You will need 4 small screws to close the case over the mobius.
Supporting Video - Please watch for more information
Great when used in environments like this :)
You'll notice the holes in the top part of the case has a 0.2mm skin over the hole. This just makes for a cleaner print. Once you finish printing it, simply open the hole up using almost anything from a drill or even a screwdriver. I'll add a video to this section once I do a how to video on this print.
Print colour black is preferable since it will reflect far less into the lens. Also depending on the lens used you may have to file away small sections to move the out of lens view.
Also use either 0.2 layer height or 0.1mm
Hope you enjoy it and it saves your Mobius