Lifeboats of the RMS Titanic
by agepbiz, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
I am currently working on a 3D model of the RMS Titanic (not for printing, at least not yet) but wanted to testprint one of the main lifeboats. This lifeboat model has been tweaked to print nice at 1:100 scale, since some of the thinner parts of the model had to be made thicker. The rudder is made as a separate part, since it was stored on board while on the Titanic
I have uploaded all the parts as separate STL files
Printed at 100 microns without raft and support. 1.75mm filament should fit the peg holes. The two halves was glued together
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Lifeboats of the RMS Titanic by agepbiz is licensed under the Creative Commons - Attribution license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving agepbiz a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure agepbiz would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).